Apple WWDC 1996/WWDC96_1996 (CD).toast/Technology Materials/MacOS 8 Resources/Developer Tools/Mac OS 8 Interfaces & Libraries/Interfaces/IDLIncludes/FileManager.idl

Text File | 1996-05-01 | 31.1 KB | 805 lines | [TEXT/MPS ]

/*
     File:        FileManager.idl

     Contains:    FileManager Interface

     Version:    Technology:    System 8
                 Release:    Universal Interfaces 3.0d3 on Copland DR1

     Copyright:    © 1984-1996 by Apple Computer, Inc.  All rights reserved.

     Bugs?:        If you find a problem with this file, send the file and version
                 information (from above) and the problem description to:

                     Internet:    [e-mail]
                     AppleLink:    APPLE.BUGS

*/
#ifndef __FILEMANAGER_IDL__
#define __FILEMANAGER_IDL__

#include <somobj.idl>
#include <somcls.idl>

#ifndef __FILEMANAGERTYPES_IDL__
#include <FileManagerTypes.idl>
#endif
#ifndef __FILES_IDL__
#include <Files.idl>
#endif
#ifndef __FINDER_IDL__
#include <Finder.idl>
#endif

#ifdef __SOMIDL__

/* You can use FileManager.h or FileManagerSPI.h, but not both */
#ifndef _FILEMANAGERSPI__
#if FOR_SYSTEM8_PREEMPTIVE
/*>>>>>>>>>>>>>>>>>>>>>>>>>>>>> F o u n d a t i o n  D e f i n i t i o n s <<<<<<<<<<<<<<<<<<<<<<<<<<<<<*/
/*
****************************************************************************
    CONSTANTS & TYPES
****************************************************************************
*/
typedef UInt32                    FSInfoVersion;

typedef UInt32                    FSPathnameType;

typedef OptionBits                FSFileFlags;

typedef SOMLargeStruct            FSFileInformation;            /* Derived from a struct of 84 bytes in size */

typedef OpaquePtr                FSFileInformationPtr;        /* Substituted OpaquePtr for “FSFileInformation*” */

typedef OptionBits                FSFolderFlags;

typedef SOMLargeStruct            FSFolderInformation;        /* Derived from a struct of 68 bytes in size */

typedef OpaquePtr                FSFolderInformationPtr;        /* Substituted OpaquePtr for “FSFolderInformation*” */

typedef OptionBits                FSVolumeFlags;

typedef SOMLargeStruct            FSVolumeInformation;        /* Derived from a struct of 104 bytes in size */

typedef OpaquePtr                FSVolumeInformationPtr;        /* Substituted OpaquePtr for “FSVolumeInformation*” */

typedef SOMLargeStruct            FSObjectInformation;        /* Derived from a struct of 260 bytes in size */

typedef OpaquePtr                FSObjectInformationPtr;        /* Substituted OpaquePtr for “FSObjectInformation*” */

/*>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> C O N T A I N E R S <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<*/
/*
****************************************************************************
    OBJECTS
****************************************************************************
*/
/*
    Function:    FSObjectRefClone
    Purpose:    Return a copy of an FSObjectRef such that the copy also needs to be disposed.
    Inputs:
                object_t        The object ref to be cloned.
    Outputs:
                clone_o            Copy of object_t.
    Notes:
                The value returned is the same value passed as input in object_t.  This call
                would typically be used to balance a future call to FSObjectRefDispose.  Some
                examples where it might be used:
                    • A called procedure needs to save an FSObjectRef for future use, but the
                      calling conventions dictate that the caller is responsible for disposing
                      of the ref.  The called function could call FSObjectRefClone to make its
                      copy.  The caller can safely dispose of the ref, yet the callee can use
                      the ref until doing its own dispose.
                    • In object-oriented programming, an object could be passed an FSObjectRef
                      in its constructor.  The destructor would be expected to dispose the ref,
                      but so would the routine that created the object.  FSObjectRefClone could
                      be used in the constructor.

                The returned FSObjectRef is registered to the calling process (as must object_t).
*/
/*
    Function:    FSObjectRefDispose
    Purpose:    Dispose of an FSObjectRef previously returned to a process.
    Inputs:
                object_t        The object ref to be disposed.
    Outputs:
    Notes:
                A process must dispose of all FSObjectRefs returned to it.  The FSObjectRefs
                may be returned as explicit output parameters, or as properties.  If a ref
                is returned several times for a given object, it must be disposed for each
                time it was returned.

                When all refs to a given object are disposed, the File Manager will dispose
                of any resources it allocated in order to operate on that object.  All refs
                for a process will be automatically disposed upon process termination.

                For refs returned as properties (especially when iterating over muliple
                objects), the FSObjectRefDisposeBulk call may be more convenient.
*/
/*
    Function:    FSObjectFlush
    Purpose:    Flushes any data cached by the File Manager for the given object.
    Inputs:
                object_t        The object to be flushed.
    Outputs:
    Notes:
                If object_t is a file, then any data written to that file (via a stream or backing store,
                regardless of the process that opened the stream or backing store) will be written by the
                File Manager to any underlying device.  If object_t is a volume, then any data written to
                any file on that volume will be flushed.

                Any change to properties of object_t will be flushed (regardless of the object's type).

                Data about the object (or contained in the object) may still reside in the File Manager's
                caches, but any changes will have been written out by the File Manager.  Note that the
                underlying device's driver, or the device itself, may cache some data, so the File Manager
                cannot guarantee that all data has actually been written to the underlying media.



*/
/*
    Function:    FSObjectRefRegister
    Purpose:    Allow an FSObjectRef to be used by another process.
    Inputs:
                senderObject_t        The object ref.
                receiverPid_i        The other process that will be using senderObject_t.
    Outputs:
    Notes:
                This call allows one process to send an FSObjectRef to another process
                such that the other process can use the FSObjectRef itself.  The process
                specified by receiverPid_i must also dispose of senderObject_t.  The File
                Manager acts as if senderObject_t has been returned to receiverPid_i.





                You might use this call if you have several processes where one process
                (typically a server of some kind) obtains FSObjectRefs for use by other
                processes (typically clients of that server).  If the other process (as
                specified by receiverPid_i) won't actually call the File Manager with
                that FSObjectRef, then it doesn't need to be registered to that process.

                It would also be possible to have the server process make all of the
                calls to the File Manager.  FSObjectRefs could still be passed between
                client and server, but if the clients never use the refs directly, then
                there would be no need to register the refs to those clients.  (But beware:
                the server would still be responsible for disposing of all refs returned to
                it; the server would probably have some cleanup and disposal to do if one
                of its client processes were to terminate.)
*/
/*
============================================================================
    Volume Sets
============================================================================
*/
/*
    Function:    FSVolumeSetGetInformation
    Purpose:    Returns an FSObjectRef for a Volume Set specified by an
                FSVolumeSetObjID.
    Inputs:
                volumeSet_t                The volume set.
    Outputs:
                object_o                Object ref for the volume set.
                includesBootVolume_o    True if the volume set includes the boot volume.
    Notes:
                There is currently only one volume set.  In the future there could be others
                (perhaps file servers; perhaps to support multiple local users).
*/
/*
============================================================================
    Folders
============================================================================
*/
/*
    Function:    FSFolderCreate
    Purpose:    Create a new named folder within a specified folder
    Inputs:
                containerRef_t        The object ref of the parent of the new folder.
                folderName_i        The name of the new folder as a _persistent_ TextObject.
    Outputs:
                folderRef_o            The object ref of the new folder.
    Notes:
                An error will be returned if the folder already exists.
*/
/*
============================================================================
    Files
============================================================================
*/
/*
    Function:    FSFileCreate
    Purpose:    Create a new named file within a specified folder
    Inputs:
                containerRef_t        The object ref of the parent of the new file.
                fileName_i            The name of the new file as a _persistent_ TextObject.
                fileCreator_i        The new file's Finder creator.
                fileType_i            The new file's Finder type.
    Outputs:
                fileRef_o            The object ref of the new file.
    Notes:
                An error will be returned if the file already exists.
*/
/*
============================================================================
    Folder and File Requests
============================================================================
*/
/*
    Function:    FSObjectDelete
    Purpose:    Deletes an object.  The FSObjectRef is NOT disposed; you must still dispose it yourself.
                Further attempts to use the ref will return errors (such as E_ObjectNotFound).

    Inputs:
                object_t        The object to be deleted.
    Outputs:
*/
/*
    Function:    FSObjectMoveRename
    Purpose:    Move a file or folder to a new folder and (optionally) rename it.
    Inputs:
                sourceObjectRef_t    The object ref of the file or folder to move.
                destContainerRef_i    The object ref of the new parent folder.
                newObjectName_i        The new name for the moved file or folder (optional).
    Outputs:
    Notes:
                An error will be returned if another file or folder exists in the
                folder specified by destContainerRef_i which has the same name as
                sourceObjectRef_t.
*/
/*
    Function:    FSObjectRename
    Purpose:    Rename a file or folder.
    Inputs:
                sourceObjectRef_t    The object ref of the file or folder to rename.
                newObjectName_i        The new name for the file or folder.
    Outputs:
    Notes:
                An error will be returned if another file or folder exists in the
                same folder as sourceObjectRef_t with the name newObjectName_i.
*/
/*>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> C a p a b i l i t i e s <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<*/
/*
****************************************************************************
    PROPERTY ACCESS METHODS
****************************************************************************
*/
/*
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Object Property Simple Values
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
*/
/*
    Function:    FSObjectGetOneProperty
    Purpose:    Get one property attribute of an object.
    Inputs:
                objectRef_t            The object ref.
                property_i            The property attribute to get.
                propertySize_i        The size of the property buffer specified
                                    by propertyValue_o
    Outputs:
                property_o            The requested property data.
    Notes:
                This function can be used to get the value of a simple property as
                well as other attributes of all properties such as size, type,
                state, etc. The attribute to get is specified by
                property_i->attribute.

                Fork property values must be obtained by using the stream or mapped
                file access routines.
*/
/*
    Function:    FSObjectGetInformation
    Purpose:    Get a predefined aggregate property set for an object.
    Inputs:
                objectRef_t            The object ref.
                infoVersion_i        The version of the FSObjectInformation data record
                                    specified by objectInfo_o.
    Outputs:
                objectInfo_o        The aggregate property data (optional).
                objectName_o        The name of the specified object (optional).
    Notes:
                Use kFSInfoCurrentReleasedVersion for infoVersion_i to specify the latest
                version of the FSObjectInformation record. infoVersion_i is ignored
                if objectInfo_o is omitted.

                objectName_o, if specified, must reference a preinitialized persistent
                TextObject of sufficient size to contain the object's name.
*/
/*
    Function:    FSObjectGetVolumeInformation
    Purpose:    Get a predefined aggregate property set for a volume object.
    Inputs:
                volumeItemRef_t        The object ref of a file or folder on the volume or
                                    the volume itself.
                infoVersion_i        The version of the FSObjectInformation data record
                                    specified by volumeInfo_o.
    Outputs:
                volumeInfo_o        The aggregate volume property data (optional).
                volumeObjectRef_o    The object ref of the volume (optional).
                volumeName_o        The name of the volume (optional).
    Notes:
                Use kFSInfoCurrentReleasedVersion for infoVersion_i to specify the latest
                version of the FSObjectInformation record. infoVersion_i is ignored
                if volumeInfo_o is omitted.

                volumeName_o, if specified, must reference a preinitialized persistent
                TextObject of sufficient size to contain the volume's name.

                This function is functionally equivalent to FSObjectGetInformation when
                the target object ref is the volume's object ref.
*/
/*
    Function:    FSObjectSetOneProperty
    Purpose:    Set one property attribute of an object.
    Inputs:
                objectRef_t            The object ref.
                property_i            The property attribute to set.
                propertySize_i        The size of the property buffer specified
                                    by propertyValue_i.
                propertyData_i        The new property data.
    Outputs:
    Notes:
                Fork property values must be changed by using the stream or mapped
                file access routines.
*/
/*
============================================================================
    Stream-based Access Method
============================================================================
*/
/*
    Function:    FSStreamClose
    Purpose:    Close a stream previously opened with FSStreamOpen or FSStreamOpenWithConstraints.
    Inputs:
                stream_t            The stream to close.
    Outputs:
    Notes:
                Any data written to the stream is flushed (written by the File Manager) before the
                stream is closed.  The FSStreamObjID, stream_t, may no longer be used.  Any resources
                allocated by the File Manager for use by this stream will be disposed.
*/
/*
    Function:    FSStreamFlush
    Purpose:    Any data written to the stream will be written by the File Manager.
    Inputs:
                stream_t            The stream to flush.
    Outputs:
    Notes:
                Stream data may still reside in the File Manager's caches, but any changes will have
                been written out by the File Manager.  Note that the underlying device's driver, or
                the device itself, may cache some data, so the File Manager cannot guarantee that
                all data has actually been written to the underlying media.

                Other information about the object (such as its modification date) might not be flushed
                by this call, though any volume-level data needed to access the stream will be.


*/
/*
    Function:    FSStreamGetAbsoluteEOF
    Purpose:    Get the logical end-of-file of an open file fork.
    Inputs:
                stream_t            The target stream.
    Outputs:
                currentEOF_o        The logical end-of-file of the specified
                                    stream.
    Notes:
*/
/*
    Function:    FSStreamGetMark
    Purpose:    Returns the current mark (position offset) for a stream.
    Inputs:
                stream_t            The stream.
    Outputs:
                currentMark_o        Current offset in the stream, stream_t.
    Notes:
                This call returns the offset from the start of the file that would be
                equivalent to using a FSForkPositionDescriptor whose positionOffset is
                0, and whose positionMode is kFSFromMark.  A stream's mark is set to
                the byte following the last read or write, or via FSStreamSetMark.
*/
/*
    Function:    FSStreamOpen
    Purpose:    Open a file fork for stream access.
    Inputs:
                fileObjectRef_t        The object ref of the file to open.
                fork_i                The fork to open.
    Outputs:
                stream_o            The new stream ID.
    Notes:
                The only allowable values for fork_i are kFSDataFork and
                kFSResourceFork.

                FSStreamOpen attempts to open the fork with exclusive read/write
                access. If the file is locked or is open on another stream with
                conflicting access constraints, then an error is returned. Use
                FSStreamOpenWithConstraints() to specify particular access
                constratins.
*/
/*
    Function:    FSStreamSetAbsoluteEOF
    Purpose:    Set the logical end-of-file of an open file fork.
    Inputs:
                stream_t            The target stream.
                eof_i                The new logical end-of-file of the stream.
    Outputs:
    Notes:
                If there is not enough space on the volume to set the EOF of
                the fork specified by stream_t to eof_i, then the EOF is not
                changed and an error is returned.
*/
/*
    Function:    FSStreamSetMark
    Purpose:    Sets the current mark (position offset) for a stream.
    Inputs:
                stream_t            The stream.
                newPosition_i        The new position of the stream's mark.
                options_i
    Outputs:
                originalMark_o        The stream's mark, before being changed (relative
                                    to the start of the stream).
                currentMark_o        The new mark, relative to the start of the stream.
    Notes:
                A stream's mark is usually used for sequential access to a stream,
                or to position relative to the ending position of the last operation
                on a stream.  This call lets you explicitly set the mark for future
                operations that will operate relative to the current mark.

                If kFSMarkPinToEOF is set in options_i, and the new position specified
                by newPosition_i would exceed the current end of the stream (also known
                as End Of File or EOF), then the mark will be set to the EOF and E_NoError
                is returned.  Otherwise, an error will returned.  The mark may never be
                set past the end of the stream.


*/
/*
    Function:    FSStreamSimpleRead
    Purpose:    Read data from an open stream.
    Inputs:
                stream_t            The target stream.
                requestLength_i        The number of bytes to read from the fork.
                position_i            The starting position for the read operation

    Outputs:
                data_o                The address of a buffer to the read bytes.
                actualLength_o        The actual number of bytes read from the file (optional).
                currentMark_o        The mark position within the stream after the
                                    read operation (optional)
    Notes:
                The stream mark is always positioned after the last byte read after all
                calls to FSStreamSimpleRead().

                If an attempt is made to read beyond the logical EOF of the fork, then
                the mark is set at the logical EOF of the file, actualLength_o contains
                the actual number of bytes read, and an error is returned.
*/
/*
    Function:    FSStreamSimpleWrite
    Purpose:    Write data to an open stream.
    Inputs:
                stream_t            The target stream.
                requestLength_i        The number of bytes to write to the fork.
                data_i                The address of a buffer contating the data to write.
                position_i            The starting position for the write operation

    Outputs:
                actualLength_o        The actual number of bytes written to the file (optional).
                currentMark_o        The mark position within the stream after the
                                    read operation (optional)
    Notes:
                The stream mark is always positioned after the last byte written after all
                calls to FSStreamSimpleWrite().

                If an attempt is made to write beyond the logical EOF of the fork, then
                the EOF is moved to the byte following the last written byte.
*/
/*
============================================================================
    Memory-mapped Access Method(Backing Store Requests)
============================================================================
*/
/*
    Function:    FSMappedFileClose
    Purpose:    Closes an access path to a file used for backing store.
    Inputs:
                backingStore_t        The backing store object.
    Outputs:
    Notes:
                Basically the same as FSStreamClose, but for a backing store.

                All data written to this backing store (by writing to pages backed by
                this store) will be flushed (written) by the File Manager.
*/
/*
    Function:    FSMappedFileFlush
    Purpose:    Any data written via the backing store will be written by the File Manager.
    Inputs:
                backingStore_t        The backing store to flush.
    Outputs:
    Notes:
                Data may still reside in the File Manager's caches, but any changes will have been
                written out by the File Manager.  Note that the underlying device's driver, or the
                device itself, may cache some data, so the File Manager cannot guarantee that all
                data has actually been written to the underlying media.

                Other information about the object (such as its modification date) might not be flushed
                by this call, though any volume-level data needed to access the fork data will be.
*/
/*
    Function:    FSMappedFileGetAbsoluteEOF
    Purpose:    Return the EOF (length) of the fork being accessed by the given backing store.
    Inputs:
                backingStore_t        The backing store used to access the fork.
    Outputs:
                currentEOF_o        The size, in bytes, of the fork.
    Notes:
                Since access to a fork via a backing store (i.e. memory mapped file access) is
                accomplished by directly accessing memory pages, the virtual memory system must
                read and write entire pages.  If the last page is modified, the entire page is
                written, resulting in the fork size being rounded up to a multiple of a page size.
                Similarly for access to pages beyond the fork's EOF.

                This call returns the current EOF (length) of the underlying fork.  This may be
                set implicitly by writing to backed pages, or by using the FSMappedFileSetEOF
                call.  It may also be changed by streams opened to the same fork.
*/
/*
    Function:    FSMappedFileOpen
    Purpose:    Open a file fork for memory mapped access.
    Inputs:
                fileObjectRef_t        The object ref of the file to open.
                fork_i                The fork to open.
    Outputs:
                backingStore_o        The backing store used to access the fork.
    Notes:
                The only allowable values for fork_i are kFSDataFork and
                kFSResourceFork.

                FSMappedFileOpen attempts to open the fork with exclusive read/write
                access. If the file is locked or is open on another stream with
                conflicting access constraints, then an error is returned. Use
                FSMappedFileOpenWithConstraints() to specify particular access
                constratins.
*/
/*
    Function:    FSMappedFileSetAbsoluteEOF
    Purpose:    Sets the EOF (length) of the fork being accessed by the given backing store.
    Inputs:
                backingStore_t        The backing store used to access the fork.
                eof_i                The new length (EOF) of the fork.
    Outputs:
                currentEOF_o        The new size, in bytes, of the fork.
    Notes:
                Since access to a fork via a backing store (i.e. memory mapped file access) is
                accomplished by directly accessing memory pages, the virtual memory system must
                read and write entire pages.  If the last page is modified, the entire page is
                written, resulting in the fork size being rounded up to a multiple of a page size.
                Similarly for access to pages beyond the fork's EOF.

                This call allows the EOF to be explicitly set for a fork being accessed via a
                backing store.  Any data beyond the EOF will not actually be written to the fork.
                The File Manager has no way to detect whether access to pages occurs beyond the
                EOF; it is a programming error to access bytes beyond the EOF via a backing store.

                This call would typically be used when a fork has been memory mapped to enable
                convenient access to a file's data structures as if it were completely in memory.
                You would make all changes to the data structures, then use this call to indicate
                the number of bytes that are valid and should be written to the fork.
*/
/*
****************************************************************************
    NAVIGATION & ENUMERATION
****************************************************************************
*/
/*
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Object Iteration
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
*/
/*
    Function:    FSObjectIterateOnce
    Purpose:    Iterate to the next object in the current container and get
                aggregate property information.
    Inputs:
                iterator_t                The object iterator.
                objectInfoVersion_i        The version of the FSObjectInformation data record
                                        specified by objectInfo_o.
    Outputs:
                objectInfo_o            Aggregate property information about the current
                                        iterator object (optional).
                objectRef_o                The object ref of the current iterator object (optional).
                objectName_o            The name of the current iterator object (optional).
    Notes:
                Use kFSInfoCurrentReleasedVersion for infoVersion_i to specify the latest
                version of the FSObjectInformation record. infoVersion_i is ignored
                if objectInfo_o is omitted.

                objectName_o, if specified, must reference a preinitialized persistent
                TextObject of sufficient size to contain the object's name.

                If the iterator has reached the end of it's current container, then an
                exception will be returned.
*/
/*
    Function:    FSObjectIteratorChangeCurrentScope
    Purpose:    Move an object iterator into or out of a container.
    Inputs:
                iterator_t        The object iterator.
                movement_i        The direction to move: into or out of a container.
    Outputs:
    Notes:
                If movement_i is kFSObjectEnter, then the iterator must be positioned on
                an object that is capable of containing other objects; it does not need to
                actually contain any objects at that time.  That object will become the new
                current scope of the iterator and it will be in Start Of Iteration state
                (meaning that all objects in the current scope have yet to be returned).
                The iterator will not be positioned on any object.

                If movement_i is kFSObjectExit,  then the current scope will become the object
                that contains the current scope; the iterator's new position will be the object
                that was the current scope.  If the current scope and the outermost scope were
                the same, then the outermost scope will also change to the new current scope and
                E_ExitIteratorScope is returned (so that you realize you will be iterating outside
                of the scope that you used to create the iterator; the iterator remains usable).

                Object iterators keep track of all of the objects between the outermost scope and
                the current scope (this is known as the "scope stack").  If any object in the scope
                stack is moved, the iterator is invalidated and will return the error
                E_IteratorScopeException until it has been explicitly fixed (by FSObjectIteratorRecreate)
                or disposed.  This call adds or removes objects from the scope stack.
*/
/*
    Function:    FSObjectIteratorCreate
    Purpose:    Create an iterator for iterating over objects.
    Inputs:
                outermostScope_t        The initial outermost scope and current scope.
                options_i                Controls whether the iterator will traverse objects in
                                        a single container or all embedded (nested) containers.
                                        Also controls which kinds of objects will be returned.
    Outputs:
                iterator_o                The object iterator.
    Notes:
                The outermost scope and current scope of the iterator are set to outermostScope_t.
                The iterator is not positioned on any object, though it is inside outermostScope_t.
                OutermostScope_t must be an object capable of containing other objects (such as the
                Universe, a volume set, a volume, or a folder).  The iterator is put into "Start Of
                Iteration" state, meaning that all objects in the current scope have yet to be
                returned.

                The File Manager allocates resources and maintains state for every iterator.  When
                you have finished using an iterator, you should call FSObjectIteratorDispose to dispose
                of it.
*/
/*
    Function:    FSObjectIteratorDispose
    Purpose:    Dispose of an object iterator.
    Inputs:
                iterator_t        The object iterator.
    Outputs:
    Notes:
                The File Manager will dispose of the iterator and release any resources
                allocated to the iterator.  Further attempts to use the iterator will result
                in an error.


*/
/*
    Function:    FSObjectIteratorRestart
    Purpose:    Place an object iterator in the Start Of Iterator state, in its current scope.
    Inputs:
                iterator_t        The object iterator.
    Outputs:
    Notes:
                The iterator is not positioned on any object.  The iterator is put into "Start Of
                Iteration" state, meaning that all objects in the current scope have yet to be
                returned.

                You would use this call to completely restart iteration within the current scope,
                ignoring any state about objects previously returned in the current scope.  The
                outermost scope is not affected.  State information about which objects have been
                returned from scopes outside the current scope is unchanged.
*/
/*
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Object Resolution
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
*/
/*
    Function:    FSObjectCreateRef
    Purpose:    Get the object ref for a named object in a given container.
    Inputs:
                container_i                The object container ref.
                objectName_i            The name of the target object.
    Outputs:
                objectRef_o                The resulting object ref.
    Notes:
*/
/*
    Function:    FSObjectExchange
    Purpose:    Exchange the properties of two objects.  Typically used for "safe
                saving", while maintaining an object's persistent reference.
    Inputs:
                object1_i        One object.
                object2_i        The object to exchange it with.
    Outputs:
    Notes:
                This call is used to allow a "safe save" that preserves an object's
                persistent reference.  For example, you might want to save an updated
                set of properties to an object so that any errors while saving result
                in the object being unchanged; but, you also want the object's persistent
                reference to remain unchanged (so that things like aliases still work).

                What you would do is create a second object somewhere (in a temporary
                folder, for example).  Write out all of the properties, both unchanged
                and changed, to the second object.  When done saving, you would call
                FSObjectExchange with both objects; the contents of the two objects get
                swapped in such a way that the original object has the new properties,
                but retains its old persistent reference.


*/
/*
    Function:    FSObjectGetContainerRef
    Purpose:    Get the object ref for the container of a given object.
    Inputs:
                objectRef_i                The object of interest.
    Outputs:
                containerRef_o            The object ref of the container of
                                        containerRef_o.
    Notes:
*/
/*
    Function:    FSObjectRefGetFSSpec
    Purpose:    Return an FSSpec for an object (suitable for use with the Files API).
    Inputs:
                object_t            The object.
    Outputs:
                fSSpec_o            An FSSpec that specifies the same object as object_t,
                                    suitable for use with the Files API.
    Notes:
                This call is intended to be used by code that is required to use both the
                Files API and the FileManager API (or has clients that use both APIs).
                For example, a piece of code may already exist with an API that uses FSSpecs,
                but has been converted internally to use the FSObjectRefs; it would use this
                call to produce an FSSpec as an output for the pre-existing API.

                It would be best to provide an API that allows its clients to use FSObjectRefs.
*/
/**/
/*
    Function:    FSSpecGetFSObjectRef
    Purpose:    Return an FSObjectRef for an object specified via an FSSpec.
    Inputs:
                theFSSpec_t            An FSSpec for the object.
    Outputs:
                theObject_o            An FSObjectRef for the object.
    Notes:
                This call is intended to be used by code that is required to use both the
                Files API and the FileManager API (or has clients that use both APIs).
                For example, a piece of code may already exist with an API that uses FSSpecs,
                but has been converted internally to use the FSObjectRefs; it would use this
                call to take an input FSSpec and convert it to an FSObjectRef to use internally;
                the FSObjectRef would then be disposed before completing the call.

                It would be best to provide an API that allows its clients to use FSObjectRefs.
*/
/*
    Function:    FSVolumeGetInformation
    Purpose:    Get the volume object ref for a given volume object ID.
    Inputs:
                volume_t        The volume's object ID.
    Outputs:
                object_o        The volume's object ref.
    Notes:
*/
#endif
#endif

#endif /* __SOMIDL__ */

#endif /* __FILEMANAGER_IDL__ */